MGSE – Products
Breathing box ISO8 ELT-230-00419-1
Breathing box to guarantee the container venting in normal air-transport conditions, as per IATA rule requirements and in emergency case (quick re-pressurizzation).
The breathing box is hosted on the lateral wall of the container and it’s possible to remove it by external side without open the container. The breathing box allow three air decontamination steps: Humidity, Molecular, Hepa. Degree of cleanliness ISO 8
Dimensions
Insert Value
Mass
Insert Value
Baseline
Tilting and Rotation Axis, electric driving
Option
Insert Value
Cleanliness
Insert Value
Certifications
Insert Value
Performances
Insert Value
Heritage
Insert Value
TRL
Insert Value
Breathing box ISO5 ELT-230-01628-0
Breathing box to guarantee the container venting in normal air-transport conditions, as per IATA rule requirements and in emergency case (quick repressurizzation).The breathing box is hosted on the lateral wall of the container and it is possible to remove it by external side without open the container. The breathing box allow three air decontamination steps: Humidity, Molecular, Hepa. Degree of cleanliness level up ISO 5.
Dimensions
Insert Value
Mass
Insert Value
Baseline
Tilting and Rotation Axis, electric driving
Option
Insert Value
Cleanliness
Insert Value
Certifications
Insert Value
Performances
Insert Value
Heritage
Insert Value
TRL
Insert Value
Safety hatch ELT-230-00823-1
The hatch consists in a flap hosted on the cap wall and 2 safety hinges, 2 adjustable locking devices to allow the correct positioning of the hatch, one adjustable release mechanism to allow the hatch opening when it is subjected to the desired pressure, compose it. A safety handle locks the flap during road transportation to avoid an accidental opening. The hatch opening pressure range is set between 10 and 12 mbar.
Dimensions
Insert Value
Mass
Insert Value
Baseline
Tilting and Rotation Axis, electric driving
Option
Insert Value
Cleanliness
Insert Value
Certifications
Insert Value
Performances
Insert Value
Heritage
Insert Value
TRL
Insert Value
Non-Return Valve ELT-230-01794-0
The non returning (one way) valve consists in a flap hosted on a flange, with safety o-rings to achieve tightness performances. The adjustable release mechanism allow the hatch opening when it is subjected to the desired overpressure. A safety release mechanism locks the flap during road transportation to avoid an accidental opening. “Open Before Flight” label is reported on the release mechanism.
The release mechanism can be easily manoeuvred by hand and by coin, to assure the operability in all conditions and without special tools.
Stainless steel and inert materials make the Valve. The system can be cleaned up to ISO5 level, and can be cleaned at Planetary Protection level by DHMR process.
The applicable maximum container air volume is 3m3, according to the ISO-1124
Dimensions
Insert Value
Mass
Insert Value
Baseline
Tilting and Rotation Axis, electric driving
Option
Insert Value
Cleanliness
Insert Value
Certifications
Insert Value
Performances
Insert Value
Heritage
Insert Value
TRL
Insert Value
ISO 8, 20T, Screw Jacks ELT- 230-01630-0
The ISO8 screw jack is mounted on the external side of transport container and Stands, allows the lifting and levelling of the container.
It has a capacity up to 20T with cleanliness level of ISO8 with compliant lubricant. Choice of a telescopic stroke from 350 mm to 520 mm and different types of foot or wheel. A protection is mounted to avoid clean room contamination, environment and operators lubricant contamination.
Dimensions
Insert Value
Mass
Insert Value
Baseline
Tilting and Rotation Axis, electric driving
Option
Insert Value
Cleanliness
Insert Value
Certifications
Insert Value
Performances
Insert Value
Heritage
Insert Value
TRL
Insert Value
ISO 5, 5T Screw Jacks ELT-230-01629-0
The ISO5 screw jack is mounted on the inside of the container generally allows the lifting and levelling of the payload trolleys. It has a capacity up to 5 t with cleanliness level up to ISO 5. Choice of a telescopic stroke up to 500 mm and different types of foot or wheel. Stainless steel made with dry lubricant technology. A protection is mounted to avoid clean room, environment and operators lubricant contamination.
Dimensions
Insert Value
Mass
Insert Value
Baseline
Tilting and Rotation Axis, electric driving
Option
Insert Value
Cleanliness
Insert Value
Certifications
Insert Value
Performances
Insert Value
Heritage
Insert Value
TRL
Insert Value
ISO 8 Winch ELT-230-01631-0
ISO 8 electrical winch is mounted on the inside of the container.
It allows the payload load and unload inside the primary container. It has a degree of cleanliness ISO 8. Choice of different types of ropes, and Choice of a wireless remote control handling from external side.
Dimensions
Insert Value
Mass
Insert Value
Baseline
Tilting and Rotation Axis, electric driving
Option
Insert Value
Cleanliness
Insert Value
Certifications
Insert Value
Performances
Insert Value
Heritage
Insert Value
TRL
Insert Value
ISO 8 Wheels with builtin brakes
ISO 8 pivoting wheel made in PTFE and Stainless Steel. The wheel is equipped with brake disk and oil wrench. The brake system is suitable to control up to 4 wheels at the same time.
The pivoting wheel is comply with -40°C up to +55°C.
Dimensions
Insert Value
Mass
Insert Value
Baseline
Tilting and Rotation Axis, electric driving
Option
Insert Value
Cleanliness
Insert Value
Certifications
Insert Value
Performances
Insert Value
Heritage
Insert Value
TRL
Insert Value
ISO 5 Remote Controller
ISO 5 User Panel is a instrument completely stainless steel made, compliant to the clean rooms ISO5 requirements, and it can allow the command and control of electrical driven MGSE. The icon and the button scan be customized.
The ISO5 user panel is suitable for:
- Tilting Trolley,
- Turn Table Trolley,
- Motorized lifting devices,
- Other electrically driven MGSE,
Dimensions
Insert Value
Mass
Insert Value
Baseline
Tilting and Rotation Axis, electric driving
Option
Insert Value
Cleanliness
Insert Value
Certifications
Insert Value
Performances
Insert Value
Heritage
Insert Value
TRL
Insert Value